Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Talley Quattro Plus 1 in 4 Alternating Air Mattress

Code S9850

The Talley Quattro Plus is a powered alternating air mattress replacement system that inflates one cell in four, so three quarters of the body stays supported through the cycle. Rated by Talley for clients at high to very high risk of pressure injury.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private.
HireEnquire about hireDelivered and set up. Ask us about weekly rates.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

The Quattro Plus deflates one cell in four, so three out of four carry the client at any moment. The bed feels stable while each point still gets its turn of relief through the cycle, which suits an anxious or a frail client who finds a lot of movement underneath them unsettling.

It replaces the standard mattress rather than sitting on top of it, so it goes straight onto the bed base. The pump is included and hangs on the bed end with the supplied brackets, and the multi-stretch cover is waterproof, vapour permeable and welded at the seams for infection control. A CPR release dumps the air fast in an emergency.

Use it for bed bound or largely immobile clients with existing pressure injuries or a high risk of developing them, at home, in aged care or in hospital, and in particular where a one in two system has already been tried and rejected.

Good to know

  • Available in single, long single, king single and long king single, from 1950 x 880 mm to 2080 x 1050 mm
  • This is a replacement mattress, not an overlay: it goes straight on the bed base
  • Needs a power point near the bed for the pump

Specifications

Overall height180 mm
Weight capacity200 kg
Assembly or install requiredNo
Bed sizeSingle
long single
king single
long king single
Cell depth180 mm
Cover materialMulti-stretch waterproof, moisture vapour permeable cover with welded seams
Pressure risk categoryHigh to very high
Pump includedYes
Replacement or overlayReplacement
Sleep surface1950 x 880 (single), 2080 x 880 (long single), 1950 x 1050 (king single), 2080 x 1050 (long king single) mm
Cycle time16 minutes
Cell count30 cells, 32 on long sizes

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link