Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Alivio Donatello Petite 4 Motor Lift Recliner Chair, Lateral Backrest, Merino Steel

Code KA555-LS

The K Care Alivio Donatello Petite is a four-motor lift recliner sized for smaller clients, with a 457 mm seat width, depth and height and a 158 kg safe working load. Independent headrest, lumbar, backrest and footrest motors give a lay-flat position, and the two-stage lift stands the client almost vertically.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

The Alivio Donatello Petite from K Care is the smaller build of the Donatello, scaled down through the seat so a client who is short in the leg or trunk sits with their feet on the floor and their back supported.

Four independent motors drive the headrest, lumbar support, backrest and footrest. Because they move separately, your client can lie flat for pressure relief, raise the head while still reclined to read or watch television, or set a supported upright posture, all from six presets on the handset rather than hunting for a position. The two-stage lift rises more vertically with only a slight forward tilt, so the client is brought up towards standing rather than tipped forward out of the seat.

This model carries the lateral support backrest in Merino Steel, a grey woven fabric, to help keep the trunk centred for a client who drifts sideways through the day. It is worth considering for pressure relief through lying flat, for a headrest that stays supportive when reclined, or for lumbar support with kyphosis, lordosis or arthritic back pain. Check the client’s height and weight against the chair’s size range and rated capacity before ordering.

Good to know

  • Warranty: 5 years on the steel frame and motors, 3 years on the lift and scissor mechanisms, 2 years on electronics, handset and fabric
  • Also available with a standard roll backrest (KA555-SB) and in Canyon Steel leather-look fabric
  • Needs clearance behind the chair for the full recline; allow for the 1830 mm reclined length
  • Delivered assembled and set up in the home by our team where possible

Specifications

Overall width851 mm
Overall height1041 mm
Seat width457 mm
Seat depth457 mm
Seat height457 mm
Weight capacity158
Weight70 kg
Warranty5 years frame and motors, 3 years lift mechanism, 2 years electronics, handset and fabric
Cover materialMerino Steel woven fabric
Other specificationReclined length 1830 mm; two-stage lift; lay-flat
Overall depth978 mm
Power sourceMains powered, four motors
Seat typeLateral support backrest

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link