Video
Standards Compliance
AS/NZS ISO 10535:2011, Hoists for the transfer of disabled persons
Specifications
| Specification | Imperial | Metric |
|---|---|---|
| Safe Working Load | 500 Ibs | 227 kgs |
| Maximum Overall Length | 57.5 inches | 1460 mm |
| Minimum Overall Length | 55.1 inches | 1400 mm |
| Maximum Overall Height | 81.3 inches | 2065 mm |
| Minimum Overall Height | 57.5 inches | 1460 mm |
| Spreader Bar – Maximum Height | 75.2 inches | 1910 mm |
| Spreader Bar – Minimum Height | 16.9 inches | 430 mm |
| Height at Maximum Reach | 51.5 inches | 1310 mm |
| Reach at Maximum Height | 25.6 inches | 650 mm |
| Reach at Minimum Height | 15.7 inches | 400 mm |
| Maximum Reach (Centre of spreader bar to front of the mast) | 36.6 inches | 930 mm |
| Turning Radius | 64.2 inches | 1630 mm |
| Legs Open – External Width | 45.2 inches | 1150 mm |
| Legs Open – Internal Width | 40.1 inches | 1020 mm |
| Legs Closed – External Width | 26.4 inches | 670 mm |
| Legs Closed – Internal Width | 21.6 inches | 550 mm |
| Overall Height of Legs | 4.7 inches | 120 mm |
| Overall Height of Legs (Low leg model) | 2.3 inches | 59 mm |
| Ground Clearance | 1.4 inches | 35 mm |
| Ground Clearance (Low leg model) | 0.8 inches | 20 mm |
| Front Twin Castors | 4.0 inches | 100 mm |
| Front Twin Castors (Low leg model) | 2.0 inches | 50 mm |
| Rear Braked Castors | 4.0 inches | 100 mm |
| 4-point Positioning Cradle – Maximum Height | 61.0 inches | 1550 mm |
| 4-point Positioning Cradle – Minimum Height (usable) | 15.4 inches | 390 mm |
| Weights | Imperial | Metric |
|---|---|---|
| Mast, Base & Boom Assembly (includes 6-point spreader bar) | 81.4 Ibs | 37.0 kgs |
| Power Pack | 6.6 Ibs | 3.0 kgs |
| Total (including 6-point spreader bar) | 88.0 Ibs | 40.0 kgs |
| Base Assembly | 44.0 Ibs | 20.0 kgs |
| Mast & Boom Assembly (excluding battery) | 37.4 Ibs | 17.0 kgs |
| 4-point Positioning Cradle (manual operation) | 13.2 Ibs | 6.0 kgs |
| 4-point Positioning Cradle (powered operation) | 19.8 Ibs | 9.0 kgs |
Specifications may vary due to manufacturing tolerances
