Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated
,

R82 Addax

Code R82ADDAX

One paediatric standing frame that sets up prone or supine. It tilts from 0 to 90°, each leg abducts from 0 to 30°, and it comes in two sizes with a full range of supports.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private.
HireEnquire about hireDelivered and set up. Ask us about weekly rates.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

Some children need to stand leaning forward. Others need to start reclined and build up. The R82 Addax does both from one frame, so a team can change the plan without changing the equipment.

Who it suits

Children from about 700 mm to 1280 mm tall who can’t stand on their own because of reduced leg or trunk control, including children with neurological or neuromuscular conditions. Size 1 takes a child up to 30 kg and Size 2 up to 45 kg.

It sets up as a prone or a supine stander, and both tilt from 0 to 90°. A child who isn’t ready for full upright can start tilted and work towards it as tolerance grows. Each leg abducts on its own, from 0 to 30°, against a clear scale, so the hip position you prescribe is the one that gets set again tomorrow.

Daily changes and most growth adjustments are tool free, while the weight-bearing parts lock with tools so nobody moves them by accident. The open front makes standing transfers from a wheelchair easier, and the frame works with a mobile hoist for lying transfers.

Supports cover the whole body: chest and pelvic pads, 3D adjustable knee supports, 3D adjustable sandals or parted foot supports, upper arm supports, head supports, trays and three belt types. Most fit both the prone and supine set-ups.

The Addax is for indoor use at home, school or in a facility. It isn’t for outdoor use, wet areas or travelling in a vehicle with the child in it.

Specifications

Overall width540 to 1030 / 620 to 1140 mm
Overall length1060 to 1490 / 1200 to 1620 mm
Overall height1100 to 1480 / 1230 to 1610 mm
Size 1Size 1 / Size 2
Item number912001000 / 912002000
Maximum user mass30 / 45 kg
Maximum rated load53 / 70 kg
Mass device21 / 23 kg
Tilt options0 to 90° / 0 to 90°
User height700 to 1050 / 930 to 1280 mm
Abduction angle each leg0 to 30° / 0 to 30°
Static stability10° / 10°
Support surface height horizontal760 / 840 mm
Entrance height lowest145 mm (parted foot supports) 185 mm (3D sandals)
Intended useIndoor use only. Not for use in a motor vehicle.
Applicable standardEU MDR 2017/745 (manufacturer stated)

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link