Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Amylior Alltrack M3 Mid-Wheel Drive Power Wheelchair

Code ATM3-3S-MP

A Group 3 mid-wheel drive power wheelchair with six-wheel independent suspension, built to script for adults up to 136 kg who need a tight indoor turning circle and outdoor capability. The MP build carries powered tilt, recline, elevating legrests and seat elevation.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

Turning space is what defeats most power wheelchairs in a Tasmanian home or unit. The Alltrack M3 is a mid-wheel drive Group 3 chair built to turn on the spot, so a client can get out of a bedroom, down a hallway and into a bathroom without a three point turn at every doorway.

The six-wheel independent suspension is the other half of the story. All six wheels stay in contact over kerb lips, driveway joins and gravel, which keeps the ride steady for someone with pain, tone or a sensitive seating system, and stops the chair hanging up on a lip it should have cleared.

Seating is ordered to the client rather than adjusted afterwards, and the chair runs powered tilt, recline, legrests and seat elevation on VR2 or R-net electronics. That gives you pressure care, posture management and reach from the one chair.

Who it suits

Adults with a permanent mobility impairment who use a power wheelchair all day, need powered repositioning for pressure care or posture, and live in a home where turning space is tight. The mid-wheel base suits clients who drive mostly indoors and in the community rather than over open ground.

Good to know

  • Built to script, so seat size, seat functions, castor size and electronics are set at order
  • Runs on two 12 V deep cycle gel batteries, Group 22NF (50 Ah) or Group 24 (70 Ah), with an 8 A off-board charger
  • Castors 150 mm or 205 mm, drive wheels 320 mm or 355 mm
  • Base weight 58 kg

Specifications

Overall width595 mm
Seat width355 to 559 mm
Seat depth381 to 559 mm
Weight capacity136 kg
Weight58 kg
Transport weight58 kg
Turning radius510 mm
Speed10 km/h
BatteryTwo 12 V deep cycle gel cell, Group 22NF (50 Ah) or Group 24 (70 Ah), 8 A off-board charger
Motor4-pole motors
Assembly or install requiredYes
Country of manufactureCanada
Front wheel size150 mm or 205 mm castors (6 or 8 inch)
Kerb climb75 mm
Overall depth890 mm
Rear wheel sizeRear castors, with 320 mm or 355 mm mid-mounted drive wheels

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link