Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

R82 Head support, PU (For complete Head Support please select 1 bar & 1 Head Support)

Code 6172000

R82 moulded polyurethane head supports for paediatric bathing, toileting and seating frames. A separate mounting bar is ordered with the pad to make up a complete head support.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

Children with limited head control need the head steadied before the rest of a seating or hygiene setup can do its job. These are the R82 head support pads that do that on the Flamingo, Flamingo High-low, Heron and Swan Curo frames.

Two profiles sit under this listing. Head support no. 2 is the wider pad with deep sides, so it gives lateral contact as well as support behind the head and suits a child whose head falls to one side. Head support no. 4 is the alternative profile in the same range, for a child who needs less containment.

The pads are moulded polyurethane in grey, which wipes clean and copes with a wet environment, so the same pad works on a shower or toilet chair as it does on a seating system. A complete head support is one pad plus one bar system, and the bars come in swan neck, straight and turtle shapes in stainless steel.

Specifications

Type or modelDeep
No 1
No 1 (Heron)
No 2
No 3
No 4
Shallow
Winged
MaterialMoulded polyurethane, grey
Pad sizeHead support no. 2 approximately 100 x 160 x 110 mm
Bar systemsSwan neck horizontal 100 or 200 mm, swan neck vertical 190 or 340 mm, straight 230 or 370 mm, turtle 115 or 250 mm, stainless steel
ColourBlack
Blue
Grey

Compare sizes

Pick a column to select that option.

No 1, Blue6071000Select
No 2, Blue6072000Select
No 3, Blue6073000Select
No 4, Blue6074000Select
No 1 (Heron), Grey6171000Select
No 1, Black6171550Select
Type or modelNo 1No 2No 3No 4No 1 (Heron)No 1
ColourBlueBlueBlueBlueGreyBlack

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link