Skip to content
Tasmanian owned and operated
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Amylior Alltrack M3HD Powerchair

Code ATM3HD

A heavy duty power wheelchair on a mid-wheel drive base, rated to 205 kg and built to script for clients who need a wider seat and a higher load capacity than a standard chair. Takes power tilt, recline and seat elevation.

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

Larger clients are too often handed a chair that fits them but not their house. The Alltrack M3HD keeps the tight mid-wheel turning circle of the standard M3 on a wider, stronger base, so a bariatric client still gets a chair that comes about in a hallway instead of living in the lounge room.

Seat width is built to script, which covers clients well outside standard Group 3 sizing, and powered tilt and recline are available for pressure care and for anyone who cannot shift their own weight through a long day. Seat to floor height is set with the heavy duty tilt so transfers and table access still work.

Outdoors it behaves like the rest of the Alltrack range: dual-action suspension over kerbs and rough ground, and enough speed to keep up with a walking companion on a footpath.

Good to know

  • Overall length 1170 mm, base weight 60 kg without batteries
  • Two 12 V deep cycle gel batteries, Group 22NF (50 Ah) or Group 24 (70 Ah)
  • Castors 150 mm or 205 mm, centre drive wheels 320 mm or 355 mm
  • Seat depth, seating and controls are confirmed at scripting

Specifications

Overall width645 mm
Seat width430 to 660 mm
Seat height395 to 495 mm with HD tilt
Tilt range50 degrees
Recline range89 to 158 degrees
Weight capacity205 kg
Weight60 kg
Turning radius510 mm
Speed10 km/h
BatteryTwo 12 V deep cycle gel cell, Group 22NF (50 Ah) or Group 24 (70 Ah)
Assembly or install requiredYes
Country of manufactureCanada
Front wheel size150 mm or 205 mm castors (6 or 8 inch)
Kerb climb75 mm
Overall depth1170 mm
Rear wheel size320 mm or 355 mm drive wheels (12.5 or 14 inch); mid-wheel drive, so these are the centre drive wheels
Weight capacity with seat elevation181 kg

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link