Cura1 Spare Breakcord (USB Plug) Type A

Code FM4152

This is the Type A break cord for Cura1 pressure pads and floor mats. It carries the pad’s signal to the monitor and is made to separate under load, so a bed rolled away from the wall or a foot caught in the lead pulls the cord apart and leaves the pad socket intact. Cords…

How to get it

BuyQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.

HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.

TrialBook a trialTry it at home or in our showroom, no obligation.

AskAsk a questionTalk to a consultant. Call us or send a question.

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

This is the Type A break cord for Cura1 pressure pads and floor mats. It carries the pad’s signal to the monitor and is made to separate under load, so a bed rolled away from the wall or a foot caught in the lead pulls the cord apart and leaves the pad socket intact.

Cords are the consumable in a falls monitoring setup. Holding spares means a failed lead is a two minute fix, not a pad sitting unused until the next order arrives.

It comes in several lengths and plug types so you can match the connector on your monitor or nurse call interface.